Nest Box Types

Our Nest Boxes are constructed out of two types of wood in either 12mm or 18mm thicknesses.

Sterling Board - Best described as made from compressed wood shavings.

Exterior Ply Board - Best described as made from gluing thin layers of wood together.

Exterior Ply Board is more Weather Resistant and better used for the Larger Boxes or Small Boxes exposed to the worst of the weather.  We have a large number of Tit Boxes made from Sterling Board mounted in 1997.  We have found that after 5 years a number of these are nearing the end of there life and will require replacing. The Sterling Board Boxes in sheltered locations are however still in good condition and should last a good 7 years.  The Exterior Ply Board Boxes have a longer lifespan and only the boxes in the most exposed locations are startling to show signs of requiring replacement after 7 years.

The Large 18mm Sterling Board Boxes are starting to show signs of wear after 7 years exposure to the weather but still have a few more years life left in them.  These are better suited for Sheltered Locations or mounted in Barns.  The 18mm Exterior Ply Board Boxes simply last ages.

Boxes can be supplied Bare or with the Exterior Treated with one of the Wildlife Friendly Coatings seen below.  The Internals of the Treated Boxes are left Bare.  We have found that the Bare Boxes are used more readily in areas where the prospective occupants have a choice of Nesting Sites. When Ordering your Treated Nest Boxes please specify the Colour by adding one of the following letters to the end of the Product Code.

B for Dark Oak (Brown)     -     G for Golden Brown (Gold)     -     R for Red Cedar (Red)

Bare Stirling Board Tit Box - TS12-B     Bare Exterior Ply Board Tit Box - TP12-B     Treated Exterior Ply Tit Box in Brown (Dark Oak) - TB12-TB     Treated Exterior Ply Tit Box in Gold (Golden Brown) - TP12-TG     Treated Exterior Ply Tit Box in Red (Cedar Red) - TP12-TR

Top of  Page

Nest Box Features

Lid Tie on BoxWe have tried a number of Lid attachment methods over the years and always arrived back at the Plastic Flap method for Nest Boxes that we Monitor and Ring the Pulli at.  For Boxes that are not going to be monitored or if you just prefer not to see the Plastic Strip,  we also make them with the Lift of Lid or Sliding Inspection Door, depending on box design.  All the Boxes with Opening Lids are fitted with Staples allowing Plastic Ties to be used to Secure the Lid.  These are easily snipped for inspection and then replaced with a new one once the Box has been inspected.  Please remember to dispose of the Old Ties in a responsible manner.  Owl Boxes with Inspection Doors are secured in a similar way.  See Box Accessories for additional Lid and Inspection Door Tie Packs.

Tit,  Flycatcher and Starling Boxes have 4,  9mm Ø Pre-drilled Mounting Holes and are supplied with 6 Long Ties for Mounting the Boxes.  Additional and/or alternative Nest Box Mounting Packs,  all of which are suitable for Pre-drilled Mounting Holes can be found in the Box Accessories section.

Top of  Page

 

Flat Pack Nest Boxes !!!

Bare Sterling Board Tit Box and Flat Pack - TS12-B and TS12-FBAll of our Wooden Box Designs and Types are available in a Flat Pack Form with all the parts such as Nails and Plastic included along with Mounting Ties.  Entrance and Mounting Holes are Pre-drilled removing the need for Power Tools or Saws and the Treated Boxes will have already been painted for you too. All you need is a Hammer and Solid Flat Surface to work on while following the easy to use Assembly Instructions supplied with the pack.

The Flat Packs will make ideal Projects for Schools or Events.

 

 

If you require advice or further information on our Nest Boxes or have Special Requirements/Design for a Box please contact us at info@wheatear.biz

Suitable Habitat is an important factor to consider when selecting your Nest Boxes and Mounting Locations,  especially for Birds of Prey.  Again advice and help is available from info@wheatear.biz

 

Top of  Page

Tit  Boxes

Product Code

TS12-B

TS12-T(B,G,R)

TS12-FB

TS12-FT(B,G,R)

Price

£5.50

£6.50

£4.95

£5.95

Item

Bare Sterling Tit Box

Treated Sterling Tit Box - Please select B, G or R

Bare Stirling Tit Box Flat Pack

Treated Stirling Tit Box Flat Pack - Please select B, G or R

Bare Stirling Board Tit Box - TS12-B
Product Code

TP12-B

TP12-T(B,G,R)

TP12-FB

TP12-FT(B,G,R)

Price

£5.95

£6.95

£5.50

£6.50

Item

Bare Ply Tit Box

Treated Ply Tit Box - Please select B, G or R

Bare Ply Tit Box Flat Pack

Treated Ply Tit Box Flat Pack - Please select B, G or R

Treated Ply Board Tit Box in Brown - TP12-TB
   
  Description : Nest Chamber Area to bottom of Entrance Hole (LxWxH) 150mm x 150mm x 130mm. Entrance Hole 32mm Ø.  Back Plate Height 380mm.
   
  Mounting Location : We have found that the internal dimensions have more of a bearing on box use than the Mounting Location,  especially for Tits.  Most of our Boxes are set at about 1.5m height so we can monitor them without the use of Steps or Ladders.  Place the Box away from regular disturbance is about the only rule.  Birds do not read Bird Books !!!  Mounting below 1.5m may attract Willow Tit or Robin.
   
  Species : Blue Tit,  Great Tit,  Coal Tit,  Tree Sparrow,  House Sparrow,  Wren

Top of  Page

Flycatcher  Boxes

Product Code

FS12-B

FS12-T(B,G,R)

FS12-FB

FS12-FT(B,G,R)

Price

£5.50

£6.50

£4.95

£5.95

Item

Bare Sterling Flycatcher Box

Treated Sterling Flycatcher Box - Please select B, G or R

Bare Sterling Flycatcher Box Flat Pack

Treated Stirling Flycatcher Box Flat Pack - Please select B, G or R

Bare Sterling Board Flycatcher Box - FS12-B

Product Code

FP12-B

FP12-T(B,G,R)

FP12-FB

FP12-FT(B,G,R)

Price

£5.95

£6.95

£5.50

£6.50

Item

Bare Ply Flycatcher Box

Treated Ply Flycatcher Box - Please select B, G or R

Bare Ply Flycatcher Box Flat Pack

Treated Ply Flycatcher Box Flat Pack - Please select B, G or R

Bare Ply Board Flycatcher Box - FP12-B

   
  Description : Based on the Tit Box above.  Nest Chamber Area to top of Front (LxWxH) 150mm x 150mm x 100mm.  Back Plate Height 380mm.  The Lid of this Box is fixed and the plastic is used to prevent Rain entering the Back of the Box.
   
  Mounting Location : We have had some success with this type of Box but we do not have many locations that this type of box would be widely used.  Spotted Flycatchers tend to prefer the boxes mounted above 2m on a wall covered by some type of creeper.  Mounting below 2m may still attract Spotted Flycatchers but you are more likely to attract Robin.
   
  Species : Spotted Flycatcher,  Robin,  Blue Tit,  and Blackbird (A tight fit !!!)

Top of  Page

Starling  Boxes

Product Code

SS12-B

SS12-T(B,G,R)

SS12-FB

SS12-FT(B,G,R)

Price

£7.50

£9.95

£6.50

£8.95

Item

Bare 12mm Sterling Starling Box

Treated 12mm Sterling Starling Box - Please select B, G or R

Bare 12mm Stirling Starling Box Flat Pack

Treated 12mm Stirling Starling Box Flat Pack - Please select B, G or R

Bare 18mm Stirling Board Starling Box - SS18-B
Product Code

SP12-B

SP12-T(B,G,R)

SP12-FB

SP12-FT(B,G,R)

Price

£8.95

£11.50

£7.95

£10.50

Item

Bare 12mm Ply Starling Box

Treated 12mm Ply Starling Box - Please select B, G or R

Bare 12mm Ply Starling Box Flat Pack

Treated 12mm Ply Starling Box Flat Pack - Please select B, G or R

Treated 18mm Stirling Board Starling Box in Brown - SS18-TB
Product Code

SS18-B

SS18-T(B,G,R)

SS18-FB

SS18-FT(B,G,R)

Price

£8.50

£10.95

£7.50

£9.95

Item

Bare 18mm Sterling Starling Box

Treated 18mm Sterling Starling Box - Please select B, G or R

Bare 18mm Stirling Starling Box Flat Pack

Treated 18mm Stirling Starling Box Flat Pack - Please select B, G or R

Treated 18mm Stirling Board Starling Box in Gold - SS18-TG
Product Code

SP18-B

SP18-T(B,G,R)

SP18-FB

SP18-FT(B,G,R)

Price

£9.95

£12.50

£8.95

£11.50

Item

Bare 18mm Ply Starling Box

Treated 18mm Ply Starling Box - Please select B, G or R

Bare 18mm Ply Starling Box Flat Pack

Treated 18mm Ply Starling Box Flat Pack - Please select B, G or R

Treated 18mm Stirling Board Starling Box in Red - SS18-TR
   
  Description : Based on the Tit Box design but on a larger scale.  Nest Chamber Area to bottom of Entrance Hole (LxWxH) 230mm x 230mm x 260mm.  Entrance Hole 50mm Ø.  Back Plate Height 610mm.  We have found the 18mm Sterling or 12mm Ply to be more readily used.
   
  Mounting Location : This type of Box has proved successful with Starlings in York,  on Houses and on Industrial Sites. The 18mm Boxes weigh nearly 7kg so safety needs to be considered when mounting via a Ladder or Steps.  The Boxes are also used for Starlings on the edge of Woodland,  and in Woodlands for Great Spotted Woodpeckers (When filled with Polystyrene Foam).  Mounting should be at least 2m high.  We have had a majority of boxes used in the 5m to 8m range.
   
  Species : Starling,  Blue Tit,  Great Tit, Great Spotted Woodpecker (Foam Filled).  Larger hole Ø may also attract Jackdaw,  Little Owl and Stock Dove.

If you would like this Design of Box with a Larger Hole please contact us at info@wheatear.biz

Top of  Page

Barn  Owl  Boxes

Product Code

BS12-B

BS12-T(B,G,R)

BS12-FB

BS12-FT(B,G,R)

Price

£19.95

£27.95

£17.95

£25.95

Item

Bare 12mm Sterling Barn Owl Box

Treated 12mm Sterling Barn Owl Box - Please select B, G or R

Bare 12mm Stirling Barn Owl Box Flat Pack

Treated 12mm Stirling Barn Owl Box Flat Pack - Please select B, G or R

 
Product Code

BP12-B

BP12-T(B,G,R)

BP12-FB

BP12-FT(B,G,R)

Price

£30.95

£37.95

£31.95

£38.95

Item

Bare 12mm Ply Barn Owl Box

Treated 12mm Ply Barn Owl Box - Please select B, G or R

Bare 12mm Ply Barn Owl Box Flat Pack

Treated 12mm Ply Barn Owl Box Flat Pack - Please select B, G or R

 
Product Code

BS18-B

BS18-T(B,G,R)

BS18-FB

BS18-FT(B,G,R)

Price

£21.95

£29.95

£19.95

£27.95

Item

Bare 18mm Sterling Barn Owl Box

Treated 18mm Sterling Barn Owl Box - Please select B, G or R

Bare 18mm Stirling Barn Owl Box Flat Pack

Treated 18mm Stirling Barn Owl Box Flat Pack - Please select B, G or R

 
Product Code

BP18-B

BP18-T(B,G,R)

BP18-FB

BP18-FT(B,G,R)

Price

£36.95

£43.95

£37.95

£44.95

Item

Bare 18mm Ply Barn Owl Box

Treated 18mm Ply Barn Owl Box - Please select B, G or R

Bare 18mm Ply Barn Owl Box Flat Pack

Treated 18mm Ply Barn Owl Box Flat Pack - Please select B, G or R

 
   
  Description : Based on the a Popular Internal Barn Owl Box Design but has proved just as successful as an External Box.  Approximate Dimensions,  Internal Area (LxWxH) 600mm x 600mm x 450mm with a 300mm x 300mm Internal Baffle to keep out the worst of the weather from the Nesting Area.  Entrance Hole and Inspection Door 200mm x 200mm.  No Box Mountings are supplied with these Boxes. We recommend the use of the 5m Band Pack with Fasteners MP07-01 @ £3.99 as shown in the Box Accessories section.
   
  Our Standard Construction when looking towards the Box Entrance from the outside is as follows:
   
  Entrance on Front Right with Internal Baffle to left of Entrance.  Inspection Door to the left on the Back of the Box allowing easy Inspection of the Nesting Area.  If you would like the Mirror Image Version or have any other Requirements please specify when ordering or contact us at info@wheatear.biz
   
  Mounting Location : In recent year this Box Design has proved very successful. The 18mm Boxes weigh nearly 25kg so safety needs to be considered when mounting via a Ladder or Steps.  We Strongly Advise the Mounting of these Boxes is carried out by at least 2 people capable of holding the Box.  The Boxes can be used as Internal or External but would suggest 18mm Boxes for External Use.  Mounting should be at least 2m high and away from Regular Disturbance.
   
  Species : Barn Owl,  Tawny Owl,  Little Owl,  Kestrel,  Jackdaw,  Stock Dove

Top of  Page

Barn  Owl  A-Frame  Boxes

Product Code

AS12-B

AS12-T(B,G,R)

AS12-FB

AS12-FT(B,G,R)

Price

£25.95

£35.95

£22.95

£32.95

Item

Bare 12mm Sterling Barn Owl A-Frame Box

Treated 12mm Sterling Barn Owl A-Frame Box - Please select B, G or R

Bare 12mm Stirling Barn Owl A-Frame Box Flat Pack

Treated 12mm Stirling Barn Owl A-Frame Box Flat Pack - Please select B, G or R

Bare 18mm Sterling Barn Owl A-Frame Box - AS18-B
Product Code

AP12-B

AP12-T(B,G,R)

AP12-FB

AP12-FT(B,G,R)

Price

£39.95

£49.95

£42.95

£52.95

Item

Bare 12mm Ply Barn Owl A-Frame Box

Treated 12mm Ply Barn Owl A-Frame Box - Please select B, G or R

Bare 12mm Ply Barn Owl A-Frame Box Flat Pack

Treated 12mm Ply Barn Owl A-Frame Box Flat Pack - Please select B, G or R

 
Product Code

AS18-B

AS18-T(B,G,R)

AS18-FB

AS18-FT(B,G,R)

Price

£28.95

£38.95

£25.95

£36.95

Item

Bare 18mm Sterling Barn Owl A-Frame Box

Treated 18mm Sterling Barn Owl A-Frame Box - Please select B, G or R

Bare 18mm Stirling Barn Owl A-Frame Box Flat Pack

Treated 18mm Stirling Barn Owl A-Frame Box Flat Pack - Please select B, G or R

Bare 18mm Sterling Barn Owl A-Frame Box - AS18-B
Product Code

AP18-B

AP18-T(B,G,R)

AP18-FB

AP18-FT(B,G,R)

Price

£44.95

£54.95

£46.95

£56.95

Item

Bare 18mm Ply Barn Owl A-Frame Box

Treated 18mm Ply Barn Owl A-Frame Box - Please select B, G or R

Bare 18mm Ply Barn Owl A-Frame Box Flat Pack

Treated 18mm Ply Barn Owl A-Frame Box Flat Pack - Please select B, G or R

A-Fram Barn Owl Box in Tree - Colin Carter - SOG NE Suffolk Community Barn Owl Project (SOGBOP) - AP18-FTB
   
  Description : The Popular Barn Owl A-Frame Box Design for Mounting both Externally and Internally.  .  Approximate Dimensions,  Internal Area Max (LxHxD) 915mm x 915mm x 420mm with a 350mm x 420mm Internal Baffle/Ledge to keep out the worst of the weather from the Nesting Area and also act as an internal resting Ledge. There is also an External Ledge 400mm x 150mm that is covered by aid of the Box Design.  The Entrance Hole is 150mm Ø and the Inspection Door is 200mm x 200mm.  The Front Panel of the Box can be unscrewed to allow easier mounting of the Box.  No Box Mountings are supplied with these Boxes.  Due to the weight of these Boxes we recommend Bolts are used for mounting through the Back of the Box.  We have a selection of Box Mounting available in the Box Accessories section for Tree or Building Mounting,  we hope to add Chainsaw Friendly Nylon Bolts to this section soon.
   
  Mounting Location : The 18mm Boxes weigh nearly 30kg so safety needs to be considered when mounting via a Ladder or Steps.  We Strongly Advise the Mounting of these Boxes is carried out by at least 3 people capable of holding the Box.  The Boxes can be used as Internal or External but would suggest 18mm Ply Boxes for External Use.  Mounting should be at least 2m high, away from Regular Disturbance.
   
  Species : Barn Owl,  Tawny Owl,  Little Owl,  Kestrel,  Jackdaw,  Stock Dove.

Top of  Page

Barn  Owl  Pole  Boxes

Product Code

PS12-B

PS12-T(B,G,R)

PS12-FB

PS12-FT(B,G,R)

Price

£25.95

£35.95

£22.95

£32.95

Item

Bare 12mm Sterling Barn Owl Pole Box

Treated 12mm Sterling Barn Owl Pole Box - Please select B, G or R

Bare 12mm Stirling Barn Owl Pole Box Flat Pack

Treated 12mm Stirling Barn Owl Pole Box Flat Pack - Please select B, G or R

 
Product Code

PP12-B

PP12-T(B,G,R)

PP12-FB

PP12-FT(B,G,R)

Price

£39.95

£49.95

£42.95

£52.95

Item

Bare 12mm Ply Barn Owl Pole Box

Treated 12mm Ply Barn Owl Pole Box - Please select B, G or R

Bare 12mm Ply Barn Owl Pole Box Flat Pack

Treated 12mm Ply Barn Owl Pole Box Flat Pack - Please select B, G or R

 
Product Code

PS18-B

PS18-T(B,G,R)

PS18-FB

PS18-FT(B,G,R)

Price

£28.95

£38.95

£25.95

£36.95

Item

Bare 18mm Sterling Barn Owl Pole Box

Treated 18mm Sterling Barn Owl Pole Box - Please select B, G or R

Bare 18mm Stirling Barn Owl Pole Box Flat Pack

Treated 18mm Stirling Barn Owl Pole Box Flat Pack - Please select B, G or R

Well Weathered Barn Owl Pole Box in Tree - PS18-TB
Product Code

PP18-B

PP18-T(B,G,R)

PP18-FB

PP18-FT(B,G,R)

Price

£44.95

£54.95

£46.95

£56.95

Item

Bare 18mm Ply Barn Owl Pole Box

Treated 18mm Ply Barn Owl Pole Box - Please select B, G or R

Bare 18mm Ply Barn Owl Pole Box Flat Pack

Treated 18mm Ply Barn Owl Pole Box Flat Pack - Please select B, G or R

 
   
  Description : Based on the Hawk and Owl Trust Barn Owl Pole Box Design for Mounting Externally on Salvaged Telegraph Poles or Large Trees.  This Box is very similar to the Barn Owl Box above but Slightly Larger due to the Pitched Roof (A Local Farmer of ours calls this one The Dog Kennel).  Approximate Dimensions,  Internal Area (LxWxH) 600mm x 600mm x 450mm with a 300mm x 300mm Internal Baffle to keep out the worst of the weather from the Nesting Area.  Entrance Hole and Inspection Door 200mm x 200mm.  No Box Mountings are supplied with these Boxes. Mounting the Box on a Pole will Require Mountings to suite the Pole you use.  We recommend the use of the 5m Band Pack with Fasteners MP07-01 @ £3.99 as shown in the Box Accessories section for Tree or Building Mounting.
   
  Our Standard Construction when looking towards the Box Entrance from the outside is as follows:
   
  Entrance on Front Right with Internal Baffle to left of Entrance.  Inspection Door to the left on the Back of the Box allowing easy Inspection of the Nesting Area.  If you would like the Mirror Image Version or have any other Requirements please specify when ordering or contact us at info@wheatear.biz
   
  Mounting Location : In recent year this Box Design has proved very successful. The 18mm Boxes weigh nearly 30kg so safety needs to be considered when mounting via a Ladder or Steps.  We Strongly Advise the Mounting of these Boxes is carried out by at least 3 people capable of holding the Box.  If you are Mounting the Box onto a Post you may Require the use of Heavy Machinery.  The Boxes can be used as Internal or External but would suggest 18mm Boxes for External Use.  Mounting should be at least 2m high,  higher if using a Pole,  and away from Regular Disturbance.
   
  Species : Barn Owl,  Tawny Owl,  Little Owl,  Kestrel,  Jackdaw,  Stock Dove and Great Tit !!!

Top of  Page

Tower  Owl  Boxes

Product Code

WS12-B

WS12-T(B,G,R)

WS12-FB

WS12-FT(B,G,R)

Price

£13.95

£19.95

£11.95

£17.95

Item

Bare 12mm Sterling Tower Owl Box

Treated 12mm Sterling Tower Owl Box - Please select B, G or R

Bare 12mm Stirling Tower Owl Box Flat Pack

Treated 12mm Stirling Tower Owl Box Flat Pack - Please select B, G or R

Bare 18mm Sterling Board Tower Box - WS18-B
Product Code

WP12-B

WP12-T(B,G,R)

WP12-FB

WP12-FT(B,G,R)

Price

£19.95

£24.95

£21.95

£26.95

Item

Bare 12mm Ply Tower Owl Box

Treated 12mm Ply Tower Owl Box - Please select B, G or R

Bare 12mm Ply Tower Owl Box Flat Pack

Treated 12mm Ply Tower Owl Box Flat Pack - Please select B, G or R

Treated 18mm Ply Board Tower Box in Red - WP18-TR
Product Code

WS18-B

WS18-T(B,G,R)

WS18-FB

WS18-FT(B,G,R)

Price

£14.95

£20.95

£13.95

£19.95

Item

Bare 18mm Sterling Tower Owl Box

Treated 18mm Sterling Tower Owl Box - Please select B, G or R

Bare 18mm Stirling Tower Owl Box Flat Pack

Treated 18mm Stirling Tower Owl Box Flat Pack - Please select B, G or R

Bare 18mm Sterling Board Tower Box - WS18-B
Product Code

WP18-B

WP18-T(B,G,R)

WP18-FB

WP18-FT(B,G,R)

Price

£22.95

£27.95

£24.95

£29.95

Item

Bare 18mm Ply Tower Owl Box

Treated 18mm Ply Tower Owl Box - Please select B, G or R

Bare 18mm Ply Tower Owl Box Flat Pack

Treated 18mm Ply Tower Owl Box Flat Pack - Please select B, G or R

Treated 18mm Ply Board Tower Box in Red - WP18-TR
   
  Description : Based on the Popular Tower Design for Mounting Externally.  Approximate Dimensions,  Internal Area to Box Entrance (LxWxH) 300mm x 300mm x 650mm with a Total Height of 900mm. A Side Inspection Door 300mm x 200mm is situated 200mm above the bottom of the Box to prevent Nest Contents from falling out when Monitoring the Box.  No Box Mountings are supplied with these Boxes.  We recommend the use of the 5m Band Pack with Fasteners MP07-01 @ £3.99 as shown in the Box Accessories or one of the Large Bolt Packs if Mounting the Box on a Building.
   
  Mounting Location : Tawny Owls readily take to these boxes in Woodlands.  In more open areas such as Farmland with Trees in Hedgerows.  Stock Dove,  Little Owl and Jackdaw will also take to these Boxes.  Tawny Owl and Jackdaw will also use this type of Box in Part Wooded Suburban Areas.  The 18mm Boxes weigh nearly 15kg so safety needs to be considered when mounting via a Ladder or Steps.  We Strongly Advise the Mounting of these Boxes is carried out by at least 2 people capable of holding the Box.  Mounting should be at least 2m high and away from Regular Disturbance.
   
  Species : Tawny Owl,  Little Owl,  Barn Owl,  Jackdaw,  Stock Dove

Top of  Page

Kestrel  Boxes

Product Code

KS12-B

KS12-T(B,G,R)

KS12-FB

KS12-FT(B,G,R)

Price

£11.95

£16.95

£10.95

£15.95

Item

Bare 12mm Sterling Kestrel Box

Treated 12mm Sterling Kestrel Box - Please select B, G or R

Bare 12mm Stirling Kestrel Box Flat Pack

Treated 12mm Stirling Kestrel Box Flat Pack - Please select B, G or R

 
Product Code

KP12-B

KP12-T(B,G,R)

KP12-FB

KP12-FT(B,G,R)

Price

£13.95

£17.95 £18.95

£15.95

£18.95

Item

Bare 12mm Ply Kestrel Box

Treated 12mm Ply Kestrel Box - Please select B, G or R

Bare 12mm Ply Kestrel Box Flat Pack

Treated 12mm Ply Kestrel Box Flat Pack - Please select B, G or R

 
Product Code

KS18-B

KS18-T(B,G,R)

KS18-FB

KS18-FT(B,G,R)

Price

£12.95

£17.95

£11.95

£16.95

Item

Bare 18mm Sterling Kestrel Box

Treated 18mm Sterling Kestrel Box - Please select B, G or R

Bare 18mm Stirling Kestrel Box Flat Pack

Treated 18mm Stirling Kestrel Box Flat Pack - Please select B, G or R

 
Product Code

KP18-B

KP18-T(B,G,R)

KP18-FB

KP18-FT(B,G,R)

Price

£14.95

£18.95 £19.95

£16.95

£19.95

Item

Bare 18mm Ply Kestrel Box

Treated 18mm Ply Kestrel Box - Please select B, G or R

Bare 18mm Ply Kestrel Box Flat Pack

Treated 18mm Ply Kestrel Box Flat Pack - Please select B, G or R

 
   
  Description : A Large Open Fronted Design generally for Mounting Externally.  Approximate Dimensions,  Internal Area to Box Entrance Lip (LxWxH) 600mm x 380mm x 140mm with a Total Height of 300mm. No Box Mountings are supplied with these Boxes.  We recommend the use of the 5m Band Pack with Fasteners MP07-01 @ £3.99 as shown in the Box Accessories or one of the Large Bolt Packs if Mounting the Box on a Building.
   
  Mounting Location : Tawny Owls readily take to these boxes in Woodlands.  Kestrel prefer the Box in a more open areas such as Farmland with Trees in Hedgerows.  Stock Dove will also take to these Boxes.  The 18mm Boxes weigh nearly 10kg so safety needs to be considered when mounting via a Ladder or Steps.  We Strongly Advise the Mounting of these Boxes is carried out by at least 2 people capable of holding the Box.  Mounting should be at least 3m high and away from Regular Disturbance.
   
  Species : Kestrel,  Tawny Owl,  Stock Dove, Barn Owl (when mounted in building)

Top of  Page

Little  Owl  Boxes

Product Code

LS12-B

LS12-T(B,G,R)

LS12-FB

LS12-FT(B,G,R)

Price

£8.95

£11.95

£7.75

£10.95

Item

Bare 12mm Sterling Little Owl Box

Treated 12mm Sterling Little Owl Box - Please select B, G or R

Bare 12mm Stirling Little Owl Box Flat Pack

Treated 12mm Stirling Little Owl Box Flat Pack - Please select B, G or R

Bare 18mm Sterling Board Little Owl Box Flat Pack - LS18-FB
Product Code

LP12-B

LP12-T(B,G,R)

LP12-FB

LP12-FT(B,G,R)

Price

£9.95

£12.95

£8.75

£11.95

Item

Bare 12mm Ply Little Owl Box

Treated 12mm Ply Little Owl Box - Please select B, G or R

Bare 12mm Ply Little Owl Box  Flat Pack

Treated 12mm Ply Little Owl Box Flat Pack - Please select B, G or R

Bare 18mm Sterling Board Little Owl Box - LS18-B
Product Code

LS18-B

LS18-T(B,G,R)

LS18-FB

LS18-FT(B,G,R)

Price

£9.95

£12.95

£8.75

£11.95

Item

Bare 18mm Sterling Little Owl Box

Treated 18mm Sterling Little Owl Box - Please select B, G or R

Bare 18mm Stirling Little Owl Box Flat Pack

Treated 18mm Stirling Little Owl Box Flat Pack - Please select B, G or R

Treated 18mm Sterling Board Little Owl Box in Brown - LS18-TB
Product Code

LP18-B

LP18-T(B,G,R)

LP18-FB

LP18-FT(B,G,R)

Price

£10.95

£13.95

£9.75

£12.95

Item

Bare 18mm Ply Little Owl Box

Treated 18mm Ply Little Owl Box - Please select B, G or R

Bare 18mm Ply Little Owl Box Flat Pack

Treated 18mm Ply Little Owl Box Flat Pack - Please select B, G or R

Treated 18mm Sterling Board Little Owl Box in Red - LS18-TR
   
  Description : A New Design taking the best aspects of several other designs we have tried over the years.  A cross between the Starling and Barn Owl Box best describes it.   Approximate Dimensions,  Internal Area (LxWxH) 300mm x 300mm x 220mm with a Back Plate Height of 500mm. Off Centre Entrance Hole 70mm Ø with an Internal Baffle parallel with the Front.  Inspection of the Box Contents is carried out by lifting the Lid as in the Tit and Starling Box Designs.  6 9mm Ø Holes are Pre-drilled into the Back Plate but no Box Mountings are supplied with these Boxes.  We recommend the use of the 5m Band Pack with Fasteners MP07-01 @ £3.99 as shown in the Box Accessories section for mounting on Trees or one of the Large Bolt Packs if Mounting the Box on a Building.
   
  Mounting Location : Ideally in Farmland with Hedgerows containing Trees,  Typical Little Owl country.  The 18mm Boxes weigh nearly 7kg so safety needs to be considered when mounting via a Ladder or Steps.  Mounting should be at least 2m high and away from Regular Disturbance.
   
  Species : New Box Design but predecessors had Little Owl,  Jackdaw,  Stock Dove

Top of  Page

Wicker  Nest  Baskets

Product Code

WB350

WB400

Price

£4.99

£7.99

Item

Wicker Nest Basket 350mm Ø

Wicker Nest Basket 400mm Ø

Wicker Nest Basket 400mm
   
  Description : A Wire Framed Wicker Nesting Basket.  Approximate Dimensions 400mmØ = 170mm Deep. Supplied with 6 Long Ties for Mounting.
   
  Mounting Location : Depends on the Species you are trying to attract to the Nesting Basket.  Sparrowhawks will tend to select sites that have a relatively dense Leaf Canopy,  even if in a small group of trees.  Long-eared Owls prefer dense Hawthorn Thickets.  Mounting should be at least 4m high and away from Disturbance for both of these Species.  Mounting in other habitats may attract other species.
   
  Species : Sparrowhawk,  Long-eared Owl

Top of  Page

Bat  Boxes

Product Code

BAT-18S

BAT-18SI

BAT-18P

BAT-18PI

Price

£7.00

£7.00

£7.75

£7.75

Item

Bare 18mm Sterling Bat Box - Shown Here >

Bare 18mm Sterling Bat Box with Inspection Lid

Bare 18mm Ply Bat Box

Bare 18mm Ply Bat Box with Inspection Lid

Bare 18mm Sterling Bat Box - BAT-18S
   
  Description : Roost Chamber Area (LxWxH) 150mm x 150mm x 230mm.  Entrance Slit 15-20mm Wide.  Back Plate Height 610mm.  All sizes are approximate and may vary slightly.  Boxes are made from 18mm Board to retain warmth.  Ply Box Internals are sawn to rough surface and allow Bats to grip,  Sterling Boxes are slightly rough surfaced as they are.  Inspection Boxes have a lid to the same design as our Tit Boxes.  Treating Bat Boxes is not recommended.
   
  Mounting Location : Boxes should be mounted at least 3m high,  the higher the better.  They should be ideally mounted in clusters of 3 on a tree trunk with no leafy branches within 1m of the box and a clear flight path to the box entrance.  The Boxes should be mounted out of the wind and in a location that allows the box to catch the sunlight for part of the day.  The best locations are on trees near Woodland Rides or Glades close to water.  However boxes mounted on buildings will also be used.
   
  Species : Various Bats Species but may be used by Blue Tits and other small birds.
   
  Note : Under the Wildlife and Countryside Act 1981 it is an offence to Disturb, Handle or Kill Bats.  We recommend watching the Boxes at Dusk to determine weather the boxes are occupied or not.  Alternatively a Bat Detector could be used to listen for Bats calling from the boxes.  If you intend inspecting the boxes physically you will require a licence.
   
  Further Information : is available from The Bat Conservation Trust Web Site.

Top of  Page

Dormouse  Boxes

Product Code

DP12-B

Price

£6.95

Item

Bare 12mm Plywood Dormouse Box

Bare 12mm Dormouse Box - DP12-B
   
  Description : Based on the Tit Box the Chamber Area to bottom of Entrance Hole (LxWxH) 150mm x 150mm x 130mm. Entrance Hole 32mm Ø.  Back Plate Height 380mm.  Two Spacer Battens.
   
  Mounting Location : Boxes should be mounted with the two Spacer Battens keeping the box away from the Tree Trunk.
   
  Species : Designed for Dormice but may be used by other small mammals. Blue Tits and other small birds may also use this type of box.

Top of  Page

Page Last Updated 23-02-2007